Unidirectional valves Series VNR
UWT RN 3001 AW11WA3B3A
Rotary paddle level switch
Application area
The rotating paddle detector Rotonivo® RN 3001 is used in storage and process vessels as a full, demand and empty detector in all bulk solids. It can be configured for process temperatures up to +1100°C and process overpressure up to 10 bar. Buildup or a dust-intensive process environment does not in any way affect the accuracy of the measurement results of the level indicator. In addition, the sensor, which has been developed in accordance with EHEDG guidelines, meets increased hygiene requirements.
Your benefit
- Simple, reliable and maintenance-free all-rounder in bulk materials
- Can be configured for almost any application
- Plug and play level limit switch without calibration
Vacuum cup filters Series FVT
Used as pre-filters and fine filters for air with varying amounts of contamination, for the protection of the vacuum generator.
Mounted as protection for the ejector.
These filters can be mounted directly under the ejectors to protect them in case of dusty environmental conditions.
The filter element can be substituted very easily and its conditions can be checked thanks to its transparent wrapping.
These filters can be wall-mounted through a proper bracket.
Filtering of vacuum and air up to 7 bar.
Valve block
Valve blocks
Valve islands Cabinet Version Series HC
Multipole connection with 25 or 37 pins
Valve functions: 2x2/2, 2x3/2, 5/2, 5/3 CC
In applications which are subject to washing or operate in particularly dirty environments, having a specific solution represents a distinct advantage.
With the Series HC it is possible to exploit the subbase and relative perimetric seal to close the passage window of all tubings.
n this way the external environment is isolated from the internal part of the cabinet, guaranteeing a high protection level against solid and liquid particles that, upon entering, may damage the components.
All pneumatic connections are immediately available avoiding operations for the installation of panel mount fittings.
Series HC uses the same valve functions as those available in Series HN.
Thanks to a particularly flexible use of the valve positions, different configurations can be realized (further details can be found on the following pages regarding the correct management of electrical signals).
Valve islands, Individual and Multipole Series Y
Valve island with integrated Pneumatics and Electronics.
Available versions: Individual, Multipole.
Valve functions: 2x2/2; 2x3/2; 5/2; 5/3 CC
Sub-bases and valve bodies are integrated in a sole “module”.
Different kinds of cartridges and spools are inserted in the module to configure the desired valve function.
The valve island can be expanded and modified and its maintenance is easy and safe.Manuals, instruction sheets and configuration files can be found on shop.camozzi.com or on the QR code on the label of the product.
Valve islands, Multipole and Fieldbus Series 3 Plug-In
Plug-In system for Series 3 solenoid valves, G1/8 port.
Valve functions: 2x3/2, 5/2 and 5/3-way CO CC CP.
Multipole with a 25-pin Sub-D connector.
It can interface with all major serial communication protocols.
The Multipole version of Series 3 Plug-In valve island can be easily installed thanks to the front position of the Sub-D connector. The accessories of the new connection system to the Series CX serial nets enable to handle up a multipole valve island by means of a Sub-D connector or through a node integrated in the island.
The modularity of the electric and pneumatic parts allows to install up to a maximum of 22 solenoids on 22 valve positions.The electric and pneumatic modules have 2- and 3-position modularity. To optimize the signals distribution, electric modules are available for monostable and bistable valves. The pneumatic modularity enables the creation of zones with differentiated pressure.
Valve islands, Multipole and Fieldbus Series F
Multipole integrated electrical connection (PNP)
Valve functions: 2x2/2; 2x3/2; 5/2; 5/3 CC
It can interface with all major serial communication protocols.
The Multipole version of Series F valve island can be easily integrated with the accessories of the new Series CX multi-serial module, thus connecting to the different serial nets provided.
It is also possible to manage a standard multipole island by means of a Sub-D adapter or through an integrated node in the island. The typical Series F single modularity allows the installation of up to 24 solenoids on 24 valve positions, even in the Fieldbus version.The use of technopolymer in this Series has allowed to realize a valve island which is characterized by small dimensions, high flow and reduced weight. The reduced dimensions, its flexibility during the assembly as well as the wide range of valve functions make Series F a highly innovative product which is suitable for several application requirements.
Manuals, instruction sheets and configuration files can be found on catalogue.camozzi.com or on the QR code on the lable of the product.
Valve islands, Multipole and Fieldbus Series HN
Multipole connection with 25 or 37 pins
Serial connection with the most common communication protocols
Valve functions: 2x2/2; 2x3/2; 5/2; 5/3 CC
Thanks to the large range of options available, the Series HN valve islands represent an excellent solution for different applications, particularly in automation systems.
Small dimensions, high flow, pneumatic and electric modularity, electric connections on boards, possibility to interface with the multi-serial node Series CX, optimization of the signal distribution thanks to subbases for monostable and bistable solenoid valves are only some of the features that make this series a particularly innovative product.
Manuals, instruction sheets and configuration files can be found on shop.camozzi.com or on the QR code on the lable of the product.