Showing all 2 results
Silencers
Silencers in 316L stainless steel Silencers
Silencers are indispensable elements for eliminating or reducing the characteristic noise of compressed air during discharge into the atmosphere. They should always be placed on the outlets of 3/2-, 5/2- or 5/3-way valves. When carrying out maintenance, silencers should be degreased using white spirit or paraffin and compressed air blown through them in the opposite direction to the direction of operation.
Flow rate: is measured at an inlet pressure of 6 bar with exhaust in the atmosphere. Noise level: is measured through a test using a phonometer. Placing the phonometer one meter away from the application and at the same height for ten seconds, gives an average reading of the noise generated.
Silencers Series 29
Series: 2901 - 2903 - 2921 - 2931 - 2928 - 2929 - 2905
Ports: M5, G1/8, G1/4, G3/8, G1/2, G3/4, G1
Ø 4, 6, 8, 10, 12 mm
The silencers are indispensable elements for eliminating or reducing the characteristic noise of compressed air during discharge operations.
They should always be placed on the outlets of 3/2, 5/2 or 5/3-way valves.
When carrying out maintenance, the silencers should be degreased using white spirit or paraffin and compressed air blown through them in the opposite direction to operation.Flow rate: determined with inlet supply 6 bar and output in atmosphere.
Noise level: determined through a test which is carried out using a phonometer.
Placing the phonometer one meter away from the application at the same height for a period of ten seconds gives an average reading of the noise generated.