Adapters in 316L stainless steel Series X2000
Series X2000 adaptors in AISI 316L stainless steel are available in several configurations to meet the customers’ needs in terms of reliability and adaptability.
They can be used in pneumatic, oil-pressure (at low pressure) and hydropneumatic systems and can be employed in many sectors including the food, chemical and medical industries.
ADF280 Series
ADF280 series V-cone flowmeter is a new type of throttle device based on the measurement principle of venturi tube and combining the advantages of venturi tube, annular orifice plate and wear-resistant orifice plate. The sensor with a tapered throttle structure does not have a stagnant zone, and has the characteristics of fluid reshaping. Its edge is not easy to wear, and it can maintain long-term accuracy. There are many types of differential pressure transmitters to choose from, such as APT9000, APT9500, APT9600. Due to the function of temperature and pressure compensation, it can measure the flow of gas, steam, liquid, etc., and is widely used in process control and measurement in petroleum, chemical industry, metallurgy, electric power, heating, and water supply.
Adjustable overpressure exhaust valve Series VMR 1/8-B10
AFC365 Series
The AFC365 Series Flow Computer is a microprocessor-based instrument designed to measure compensated flow in the industrial environment. The AFC365 incorporates the Ideal Gas / Steam / Natural Gas compensation. The Backlit LCD display simplifies programming and clearly indicates all parameters as well as engineering units.
AFW11 – Cabinet-built Frequency Inverter
It is a drive solution for three-phase induction motors assembled on electrical panel with built-in CFW11 frequency inverter.
Its design, manufacture and assembly count on WEG’s experience, quality assurance, safety and excellent cost-effectiveness.
Two choices available, compact model - AFW11C - (mounted on panel with compact size) or standard model - AFW11 - (mounted on standard size panel), providing convenience and flexibility. They can be mounted with the available optional accessories, according to the application needs.
AFW11M – Cabinet-built Modular Frequency Inverter
The AFW11M G2, commonly referred to as “modular drive”, was developed for mounting on a modular structure, and it is available to supply high output currents with the choice of specification according to the application needs.
They are supplied in the versions with air-cooled heatsink (AFW11M) or water-cooled heatsink (AFW11W), using the new generation of modular inverters CFW11M G2 / CFW11W, in the voltages of 380 to 690 V, with input rectifier in six pulses, twelve pulses or regenerative.
AFW900 – Cabinet-built Frequency Inverter
The AFW900 is the panel-mounted frequency inverter solution for the drive and control of three-phase induction and permanent magnet motors. With the built-in CFW900 frequency inverter it provides high performance and safety, aligned with flexibility and connectivity. The set is tested according to NBR IEC 61439-1/2 and has WEG expertise in inverters and drive projects, guaranteeing quality, safety and excellent cost-benefit. The offer of standardized models and several options brings flexibility and practicality, ready-to-install solution in several applications, in addition to the option of customizations on demand.
AHT520 Series
The AHT520 Series HART communicator is a PC communication link to HART networks for commissioning, servicing, calibrating, or acquiring data from any HART instrument or transmitter.
AHT520 is a friendly user interface that enables you to set and check instrument parameters such as tag numbers and ranges, outputs, and view data.
AHT530 Series
The AHT530 Series is a battery-powered, hand-held unit designed to configure, calibrate and troubleshoot to smart transmitter either remotely or nearby.
AHT530 allows you to establish communication with a Hart field instrument over the existing 4-20 mA DC lines, covering the five process variables of flow, pressure, temperature and level, control valve etc.
AHV400 Series
The AHV400 Series manifolds feature a horizontal body design. Manifolds are constructed out of bar-stock and forged material in 316 Stainless Steel as Standard.
Standard models are available in 2-, 3-, 5-way configurations together with a full range of connection types; custom designs are available on demand.
Each manifold undergoes hydraulic pressure, pneumatic pressure, vacuum, vibration and thermal stability testing to ensure product integrity.
Air brake fittings Series 9000
Tube external diameters: 4/2; 6/4; 8/6; 10/7; 10/7,5; 10/8; 12/9; 15/12; 16/12; 18/14; mm
Fittings threads metric cylindrical: M10x1; M12x1,5; M14x1,5; M16x1,5; M18x1,5; M22x1,5
BSP GAS: G1/8; G1/4
Conical: 1/8 NPTF; 3/8 NPTF
Series 9000 fittings have been designed to connect tubing according to DIN 74324 or ISO 7628 in the pneumatic brake systems of commercial vehicles. They offer excellent reliability and ease of assembly. The range includes a very compact release tool for disconnecting tubes from the fittings.
The tube interface is shielded by a rubber cap for protecting the internal parts against dirt and water ingress. The integrity level of the interface concept, even during disassembling, is outstanding.
The Series 9000 offers a smart portfolio of different types of connectors. Depending on the demands of our customers, we are also ready to provide customized solutions.
Series 9000 fittings are TÜV certified and produced according to IATF 16949:2016 standards.