AHT530 Series
The AHT530 Series is a battery-powered, hand-held unit designed to configure, calibrate and troubleshoot to smart transmitter either remotely or nearby.
AHT530 allows you to establish communication with a Hart field instrument over the existing 4-20 mA DC lines, covering the five process variables of flow, pressure, temperature and level, control valve etc.
Features
- Common to most smart field Instruments
- AA alkaline batteries or rechargeable battery available
- Battery operation time more than 100 hours
- Low battery alarm
- Self-check function / Automatic power-off
- Large display (21 characters by 8 lines)
- Microprocessor-based field communicator
- USB port to charge
Specification
| Display | : | LCD dot matrix, 21 characters * 8 lines |
| Keypad | : | 20 General keys, one power switch |
| Signal Connection | : | Alligator clip or grabber clip |
| Cable Length | : | 1.5 m |
| Function | : | Display, setup and alteration of parameter |
| : | Zero point adjustment, calibration | |
| : | Auto power-off | |
| Communication Line | ||
| Line Length | : | Up to 1500 m |
| Load Resistance | : | 250-600 Ω |
| Load Capacitance | : | Less than 0.22 μF |
| Load Inductance | : | Less than 3.3 mH |
| Power Consumption | : | 191.3 mA (Working state) |
| : | 1 μA (Power-off state) | |
| Material | ||
| Case | : | ABS resin |
| Keyboard | : | Polycarbonate |
| Protection Class | : | IP54 |
| Operating Temperature | : | -20~55 °C |
| Storage Temperature | : | -20~55 °C |
| Ambient Humidity | : | 90% RH or less |
| Power | ||
| Battery | : | Three AA alkaline Batteries |
| : | Three Ni-MH Batteries (Rechargeable) | |
| Operable Time | : | Alkaline Battery: Up to 150 Hours |
| : | Ni-MH Battery: Up to 100 Hours | |
| Charge up time | : | Less than 12 hours |
| Dimensions | : | 231 mm (L) *102 mm (W) *61 mm (H) |
| Battery Charger | : | USB connect with computer |
| : | 90-260 VAC, 50/60 Hz | |
| Weight | : | 0.4 kg (Communicator) |
| : | 1 kg (Including accessories) | |
| Standard Package | ||
| : | ATH530 Hart Communicator * 1 set | |
| : | Communication cable 1.5 m * 1 pair | |
| : | USB connector 1.5 m (Charge) * 1 set | |
| : | Ni-MH Battery 1.2 V * 3 pcs | |
| : | Power Adapter 90-260 VAC * 1 set | |
| : | Alligator clip * 1 pair | |
| : | Grabber clip * 1 pair | |
| : | Shoulder bag * 1 set |
RELATED PRODUCTS
AMC3200E Series
The ALIAMAG AMC3200E Series is a heat meter converter of electromagnetic flowmeter that can be paired with any of ALIA AMF series sensors. The unit features multiple display parameters including flow rate, energy, flow total, energy total, supply temperature, return temperature, diagnostic, programming and troubleshooting. It is equipped with MODBUS, Bluetooth and BACnet protocol.
AMF100 Series
The AMF100 Series is an insertion-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 150-6000 mm.
AMF100 is widely used for tap water, waste water, food & beverage, pulp & paper and many other industrial fluid.
AMF100 Series electromagnetic flowmeter can be used in compact or remote type with AMC Series converter of electromagnetic flowmeter.
ASF7100 Series
The ASF7100 Series Swirl Flowmeter is a gas flow meter that combines turbine & vortex flow measurement technologies to provide a reliable, high-accuracy, robust, maintenance-free flow meter. The turbine-shaped flow inlet causes the process flow to rotate causing a vortex core to form & a subsequent secondary rotation causes thread-like spirals to be formed. These resulting secondary pressure frequencies are linear & proportional & are measured by dual piezo-electric sensors. The resulting measurements are processed & pressure & temperature compensated and then converted to the flow measurement display. ASF7100 Series Swirl Flowmeter can be widely used in petroleum, chemical, electricity, metallurgy, coal and other industries.
ATF3500 Series
The ATF3500 series is a liquid turbine flowmeter, as fluid flows through turbine rotor and drives it to rotate, the rotating rotor periodically cuts magnetic field line to generate electric pulse signal, which can be transmitted to output or transferred to the meter to display flow rate and totalizer. It features high accuracy, good repeatability, simple structure, low pressure loss, convenient maintenance, etc. It is ideal to measure the volume of low-viscosity liquids in closed pipes, such as tap and demineralised water, fuels, liquefied gases, light fuel oil, solvents, pharmaceutical fluids, food, etc.