EL 1
Conductive rod probe
Rod electrode with PTFE insulation
Application area
Rod electrode with a rod up to 4 m long. Extended temperature range through PTFE insulation. A VEGATOR 130 series controller is required for operation.
The rod electrode EL 1 is a universal level switch for conductive liquids. The instrument is ideal as overfill and dry run protection in conjunction with VEGATOR 131 or VEGATOR 132 controllers.
Your benefit
- Simple installation in narrow space applications through small sensor dimensions
- Low maintenance costs through robust design
- High flexibility through shortenable probe
EL 3
Conductive multiple rod electrode
Rod electrodes with PTFE insulation
Application area
With 2 to 5 rods, a corresponding number of switching points between 5 cm and 6 m can be realized. Extended temperature range through PTFE insulation. A VEGATOR 130 series controller is required for operation.
The multiple rod electrode EL 3 is a universal level switch for conductive liquids. The instrument is ideal as overfill and dry run protection or pump control in conjunction with VEGATOR 132 controllers.
Your benefit
- Simple setup with minimum time and cost expenditure
- High flexibility through shortenable probe
- Maintenance-free through robust design
EL 4
Conductive multiple rod electrode
Rod electrodes with PP insulation
Application area
With 2 to 5 rods, a corresponding number of switching points between 10 cm and 4 m can be realized. A VEGATOR 130 series controller is required for operation.
The multiple rod electrode EL 4 is a universal level switch for conductive liquids. The instrument is ideal as overfill and dry run protection or pump control in conjunction with VEGATOR 132 controllers.
Your benefit
- Reliable pump control through multiple rod probe
- Reduced stockkeeping through exchangeable rod probes
- High flexibility through shortenable probes
EL 6
Conductive multiple cable electrode
Cable electrodes with FEP insulation
Application area
With 2 to 5 cables, a corresponding number of switching points between 22 cm and 60 m can be realized. A VEGATOR 130 series controller is required for operation.
The multiple cable electrode EL 6 is a universal level switch for conductive liquids. The instrument is ideal as overfill and dry run protection or pump control in conjunction with VEGATOR 132 controllers.
Your benefit
- Reduced stockkeeping through exchangeable cable probes
- High flexibility through shortenable cable probes
- Economical pump control through multiple cable probe
EL 8
Conductive rod probe
Rod electrodes with PE insulation
Application area
Rod electrode with a rod up to 3 m long. A VEGATOR 130 series controller is required for operation.
The rod electrode EL 8 is a universal level switch for conductive liquids. The instrument is ideal as overfill or dry run protection in conjunction with VEGATOR 131 or VEGATOR 132 controllers.
Your benefit
- Simple installation in narrow space applications through small sensor dimensions
- Price-favourable level detection
- Economical pump control through multiple cable probe
MINITRAC 31
Radiometric sensor for density measurement
Point detector
Application area
The point detector determines the density of liquids and bulk solids from the outside without contact. The sensor is used on vessels of any geometry and on pipelines.
The Minitrac 31 is a radiation-based sensor for non-contact density measurement of liquids and bulk solids. The Minitrac 31 determines the density in a non-contact fashion. It is mounted external to the pipeline or vessel walls. Through its compact design it is ideal for mounting in hard to access positions and in locations with space restrictions.
Your benefit
- Simple retrofitting during production processes
- Exact measuring results independent of process conditions
- High plant availability through non-contact measurement
POINTRAC 31
Radiometric sensor for level detection
Short rod detector
Application area
The short rod detector monitors the limit level of liquids and bulk solids without contact. The sensor is used on vessels of any geometry and on pipelines.
The POINTRAC 31 is a radiation-based sensor for universal level detection of liquids and bulk solids. Independent of the mounting location, it monitors reliably the limit level in vessels. The sensor can be used for applications in all industries. Due to the high sensitivity POINTRAC 31 is an economical solution with minimum radiation activity.
Your benefit
- Exact measuring results independent of process conditions
- High process reliability through determination of buildup
- Economical level detection under arduous application conditions
SHLD1
VEGACAP 27
Adjustment-free, capacitive rod probe for level detection of adhesive products
Rod probe, fully PTFE or PFA insulated
Application area
For liquids, also in non-conductive containers, Sensor length up to 4 m
The VEGACAP 27 is an adjustment-free, capacitive level sensor for liquids. Typical applications are overfill and dry run protection for adhesive as well as conductive liquids. The probe operates in liquids with a dielectric constant from 1.5.
Your benefit
- Long lifetime and low maintenance requirement through robust mechanical construction
- Minimum time and cost expenditure thanks to simple setup without medium
- Exact switching point even with strong buildup
VEGACAP 35
Adjustment-free, capacitive cable probe for level detection
Cable probe, fully PE/PA insulated
Application area
For bulk solids, adjustment-free setup, Sensor length up to 20 m
The VEGACAP 35 is an adjustment-free, capacitive level sensor for bulk solids. Typical applications are overfill and dry run protection. The probe operates in products from a dielectric constant of 1.5.
Your benefit
- High flexibility through shortenable probe
- Minimum time and cost expenditure thanks to simple setup without medium
- Exact switching point even with strong buildup
VEGACAP 62
Capacitive rod probe for level detection
Rod probe, partly PTFE insulated
Application area
For liquids and bulk solids, Sensor length up to 6 m
The VEGACAP 62 is a point level sensor for use in all areas of industry. The partly insulated probe is suitable for measurement of bulk solids and liquids. The proven mechanical construction offers high functional safety.
Your benefit
- High flexibility through shortenable probe
- Long lifetime and low maintenance requirement through robust mechanical construction
- Universal use in all products
VEGACAP 63
Capacitive rod probe for level detection
Rod probe, fully PE or PTFE insulated
Application area
For liquids and bulk solids, non-abrasive, Sensor length up to 6 m
The VEGACAP 63 point level sensor can be used universalle for the measurement of non-abrasive liquids and bulk solids. The rod probe is fully insulated and the proven mechanical construction offers high functional safety.
Your benefit
- Simple planning due to variable switching point
- Savings through simple mounting and setup
- Long lifetime and low maintenance requirement through robust mechanical construction