JUMO

Actuator

Automatisierung

Flow

Humidity & CO2

Level

Liquid analysis

Pressure

Product list A-Z

Product selector

Temperature

Thermocouples

Thermocouples are designed as replacement elements for thermocouples according to DIN 43733. Alternatively, for special applications the thermocouples can be used to measure temperature directly.

Thermocouples

Screw-in thermocouples are predominantly used for measuring temperature in liquids and gases. Protection tubes made of various materials protect the measuring insert against chemical influences and mechanical damage.

Thermowells

Thermowells are used for replacement of the RTD temperature probes without emptying the system and/or pressure resistance. Shorter thermowells are mostly screwed into T-pieces while longer design types are screwed into special welded sockets or welded directly in the pipe wall.

Timers

Timer with mechanical drive and acoustic signal or change-over contacts: By turning the setting knob, the movement is wound up by means of a spring balancer. An acoustic or optical signal sounds when the preselected running time has elapsed.

TMM-45

Programmable transmitter for DIN-rail mounting.

Two-wire transmitter

Two-wire transmitters are designed for connecting pH or redox combination electrodes with plug heads to display and control devices with active analog input (4 to 20 mA). On the output side, they are equipped with a common connection for the voltage supply and standard signal.

Valve blocks

Valve blocks can be used in connection with pressure measuring devices. They are used as a shut-off valve and for adjusting the zero point of the pressure measuring device.

Web panels

The web panels are easily connected to the JUMO variTRON automation system via Ethernet. They support CODESYS Remote TargetVisu or WebVisu. In this way, visualizations created with CODESYS can be displayed on the web panels and used to operate the system. The resitive or capacitive TFT-touchscreens are available in various sizes and resolutions.

Welding protective sleeves

Welding protective sleeves are used for installing thermocouples and RTD temperature probes when replacement without draining the system and/or pressure resistance is required Pressure stability is temperature dependent and specified in the data sheet.