JUMO

Actuator

Automatisierung

Flow

Humidity & CO2

Level

Liquid analysis

Pressure

Product list A-Z

Product selector

Temperature

Push-in thermocouples

Push-in thermocouples are predominantly used for temperature measurement in solid bodies (e.g. heating plates and sealing jaws). The compensation cable is relieved of strain at the transition to the protection tube. Bend protection is available as an option.

Push-in thermocouples

Push-in thermocouples for glass melting furnaces, withstand up to 2000 °C. Designed for extreme conditions, they ensure optimum thermal insulation and reduce thermal losses. They comply with ISO standards for high accuracy and quality in corrosive atmospheres.

Redox single or double electrodes

In connection with a reference electrode the product detects the redox potential of aqueous media. Metal double electrodes are used to measure the end point in amperometric titration.

Rod thermostat with micro switch

The thermostats work on the principle of rod length expansion. The temperature-dependent change in length of the sensor tube is transmitted to a transmission mechanism with microswitch in the switch head via an inner rod with a smaller coefficient of expansion fixed in the tube.

Router module 1-port

The router module 1-port is a system component of the JUMO variTRON automation system. The module 1-port is primarily used together with a variTRON 300 central processing unit. It laterally provides the system bus output and power supply for connecting the input and output modules.

Router module 2-port

The 2-port router module extends the central unit of the JUMO variTRON automation system by 2 system bus outputs. In this way, the system bus can be transmitted to router modules 3-port (705042) on other DIN rails in the same or in other control cabinets at a distance of up to 100 m. This makes it possible to distribute input and output modules and to decentralize the automation system.

Router module 3-port

With the 3-port router module, you can arrange the JUMO variTRON automation system in a decentralized and free way. It enables input and output modules to be distributed over several DIN rails or control cabinets. A maximum distance of 100 m is possible between 2 router modules or between the central unit and the router module.

RTD temperature probe

This type of RTD temperature probe may be used in connection with temperature control and limitation devices tested according to DIN EN 14597 (DIN 3440) in heat transmission systems according to DIN 4754.

RTD temperature probe

The RTD temperature probes can be built with terminal heads made of either stainless steel, aluminum die-cast, or plastic. Various process connections are available for the different requirements of sub-areas in the food and pharmaceutical industry.

RTD temperature probes

Indoor, wall, and outdoor RTD temperature probes for air conditioning technology are mainly used to measure temperature in rooms, halls, and outdoors. Various device versions made of plastic with different protection types are available for the respective measuring task.

RTD temperature probes

Channel RTD temperature probes for air conditioning technology are predominantly used for temperature measurement in air channels and outdoors. Various device versions made of plastic with different protection types are available for the respective measuring task.

Screw-in melt RTD temperature probe

Screw-in melt RTD temperature probes are predominantly used for temperature measurement in the plastics industry and acquiring melt temperatures. Sharp or flat probe tips ensure optimum temperature acquisition depending on the requirements.