JUMO

Actuator

Automatisierung

Flow

Humidity & CO2

Level

Liquid analysis

Pressure

Product list A-Z

Product selector

Temperature

JUMO mTRON T

The analog input module 8-channel has 8 analog inputs for RTD temperature probes in a two-wire circuit, and 1 digital input (DC 0/24 V). The analog inputs are not galvanically isolated from each other.

JUMO mTRON T

The analog output module 4-channel is equipped with 4 outputs. The output signal, 0(2) to 10 V or 0(4) to 20 mA, can be configured individually for each channel. The analog outputs are controlled via the system bus.

JUMO mTRON T

The module is equipped with 12 channels, which can be configured as digital inputs or digital outputs. The digitized input states are available in the system for further processing. The digital outputs are controlled via the system bus by digital signals.

JUMO mTRON T

The router module allows the automation system to be assigned freely and in a decentralized manner. The input and output modules can therefore be distributed across several DIN rails/control cabinets. The router modules can each be placed at distance of up to 100 m to one another/to the basic system.

JUMO mTRON T

The special features of these DIN rail power supply units include their high level of efficiency and small size. Low sensitivity to transients and overvoltage as well as barely any electromagnetic radiation make usage possible in almost any environment.

JUMO mTRON T

The multifunction panel is used for simple and clear measured data visualization, operation, configuration, and parameterization of the system. As an interface between user and machine, the panel allows an optimal and clearly arranged insight into the process statuses and parameters of the system.

JUMO mTRON T

The basic version of the JUMO mTRON T automation system includes the multifunction panel 840 with a screen size of 21.3 cm (8.4") as a standard feature. The additional operating panels allow the automation system to be configured with even greater flexibility.

JUMO multirange and differential pressure transmitter

The product enables differential pressure measurement in non-aggressive gases. Permanent overpressure protects the process from dust penetration. The transmitter is mainly used in cleanrooms.

JUMO NESOS R01 LS

For point level measurement in liquids with up to 4 floats and up to 4 switching contacts. The optional temperature sensor can be used for point level measurement as well as to acquire temperature with only one measuring point.

JUMO NESOS R02 LS

For point level measurement in liquids with up to 5 floats and up to 5 switching contacts. Both the optional temperature sensor and the temperature switch can be used for point level measurement as well as to acquire temperature with only one measuring point.

JUMO NESOS R03 LS

For point level measurement of liquids with chamber. In the event of a lack of space or turbulent media, the device is mounted on the side of the tank. Available with 1 float and up to 2 switching contacts as well as an optional temperature sensor/switch.

JUMO NESOS R04 LS

The float switch is typically used to switch alarms, pumps, signal lamps, valves, and horns via a contact protection relay. When connected to intrinsically safe electrical circuits, the intrinsically safe [Ex i] version of the product meets the requirements.