Products

ABB

ALIA

CAMOZZI

G-SNS

GEFRAN

JUMO

TEMPOSONICS

VEGA

VOGTLIN

WATLOW

WEG

WISE

OTHERS

JUMO NESOS R02 LS

For point level measurement in liquids with up to 5 floats and up to 5 switching contacts. Both the optional temperature sensor and the temperature switch can be used for point level measurement as well as to acquire temperature with only one measuring point.

JUMO NESOS R03 LS

For point level measurement of liquids with chamber. In the event of a lack of space or turbulent media, the device is mounted on the side of the tank. Available with 1 float and up to 2 switching contacts as well as an optional temperature sensor/switch.

JUMO NESOS R04 LS

The float switch is typically used to switch alarms, pumps, signal lamps, valves, and horns via a contact protection relay. When connected to intrinsically safe electrical circuits, the intrinsically safe [Ex i] version of the product meets the requirements.

JUMO NESOS R20 LT

Quasi-continuous level measurement of liquids in storage tanks and containers via floats and a reed chain with a resolution of up to 5.5 mm. The level is available as a standard signal of 4 to 20 mA. In addition, a temperature sensor/switch can also be provided.

JUMO NESOS R40 LSH

The horizontal float switch can be easily mounted, e.g. on the side of a tank wall. Due to its construction it is suitable for the minimum and maximum limit level of liquids (MIN/MAX level). It offers up to 2 switching contacts for redundant level measurement. Thanks to Ex approvals, it is ideal for the chemical industry, power plants, machine and container construction.

JUMO PEKA

The process connection connects the measuring device with an application-specific process connection adapter. Based on an easy-to-clean design and a cavity-free system, the adapter system is specifically tailored to the requirements of hygienic processes.

JUMO pH glass electrodes

pH glass electrodes measure the pH value in connection with reference electrodes. Electrodes with special membrane glasses are available for measurement in different media.

JUMO PINOS L01

The product measures and monitors flow velocities of water and aqueous media based on the calorimetric measurement principle. The sensor has a robust design and can be used even in difficult conditions. Particularly so in cooling water circuits or pumps.

JUMO PINOS L02

The flow sensor measures and monitors flow velocities of liquid media. The measurement method is based on the calorimetric measuring principle. The measured value can be sent via an analog output 4 to 20 mA or a switching output.

JUMO plastoSENS T01

This especially developed transformer probe can be used in electric motors or in other high-voltage environments. In contrast to metallic temperature probes, it is made of plastic and can therefore be installed in the insulation layer without any problems.

JUMO plastoSENS T02

The sensor of the JUMO plastoSENS T is completely enclosed in plastic, which means that it offers extremely high vibration resistance. This eliminates the need for time-consuming positioning of conventional probes in harsh environmental conditions caused by moving components (e.g. motors of vehicles or machines).

JUMO plastoSENS T03

The JUMO plastoSENS T03 solves the problem of insufficient leak-tightness from conventional probes. Since the special plastics used in the injection molding process form an adhesive bond, it is completely sealed, even at the critical point of the cable outlet – ideal for sterilization applications.