Product list A-Z

JUMO MIDAS HP

This pressure transmitter can be used to measure the relative pressure in liquid and gaseous media. The pressure transmitter operates according to the thin-film strain gauge measuring principle. The pressure is converted into an electrical signal.

JUMO MPF-88

Self-monitoring control and regulation device especially for complex control and regulation processes in cooking and smoking chambers.

JUMO mTRON

The assembly group is a module of the JUMO mTRON control and automation system. The housing, with the format 91 mm × 85.5 mm × 73.5 mm (W × H × D), is made of plastic and is installed on a DIN rail.

JUMO mTRON

The assembly group is a module of the JUMO mTRON control and automation system. The housing, with the format 91 mm × 85.5 mm × 73.5 mm (W × H × D), is made of plastic and is installed on a DIN rail.

JUMO mTRON

The assembly group is a module of the JUMO mTRON control and automation system. The housing, with the format 91 mm × 85.5 mm × 73.5 mm (W × H × D), is made of plastic and is installed on a DIN rail.

JUMO mTRON

The assembly group is a module of the JUMO mTRON control and automation system. The housing, with the format 91 mm × 85.5 mm × 73.5 mm (W × H × D), is made of plastic and is installed on a DIN rail.

JUMO mTRON

The assembly group is a module of the JUMO mTRON control and automation system. The housing, with the format 91 mm × 85.5 mm × 73.5 mm (W × H × D), is made of plastic and is installed on a DIN rail. The logic module processes programs that are created according to DIN IEC 1131, Part 3 "structured text".

JUMO mTRON

The operating unit is a module of the JUMO mTRON control and automation system. As an interface between user and machine, the operating unit allows an optimal and clearly arranged insight into the process statuses and the system parameters of the JUMO mTRON automation system.

JUMO mTRON

The assembly group is a module of the JUMO mTRON control and automation system. The module is used to communicate between the JUMO mTRON modules and higher-ranking devices through a MOD/J bus interface.

JUMO PINOS L01

The product measures and monitors flow velocities of water and aqueous media based on the calorimetric measurement principle. The sensor has a robust design and can be used even in difficult conditions. Particularly so in cooling water circuits or pumps.

JUMO PINOS L02

The flow sensor measures and monitors flow velocities of liquid media. The measurement method is based on the calorimetric measuring principle. The measured value can be sent via an analog output 4 to 20 mA or a switching output.

JUMO room thermostat type AMFRc-1333

Type AMFRc-1333 is a four-stage temperature controller with high response accuracy. The wiring is designed to control a blower with different speed levels. The sequential distance of the individual switching stages in Kelvin is permanently set at the factory according to customer requirements.