Liquid analysis

Accessories

Electrodes/sensors

Transmitters and controllers

Ammonia sensitive sensor

The product measures ammonia (NH3) in aqueous solutions. It is mainly used in refrigeration plants to reliably detect possible leaks.

Combination fitting

The product is designed for mounting several electrochemical sensors. It is typically used for monitoring the disinfection of drinking and swimming pool water as well as slightly polluted process and cooling water.

Flow fittings

Flow fittings are designed for mounting electrochemical sensors (e.g. pH and redox combination electrodes, glass conductivity cells, compensation thermometers, etc.) with a Pg 13.5 screw-in thread and a 120-mm insertion length.

Immersion fittings

Immersion fittings are designed for mounting electrochemical sensors (e.g. pH and redox electrodes, glass conductivity cells, etc.) with a Pg 13.5 screw-in thread and a 120-mm insertion length. Fitting types for 1 to 3 sensors are available.

Impedance converter

The impedance converter transforms the high-impedance signal of the pH electrode (up to 1,000 MOhm) into a low-impedance signal (1 kOhm). The use of an impedance converter can also be advantageous in conjunction with a metal electrode.

JUMO AQUIS 500 AS

The product controls sensors that output a standard signal (e.g. chlorine). The graphic display enables the display of the standard signals as digits or a bar graph. 2 relay changeover contacts implement switching and alarm functions as well as control tasks with P, PI, PD, and PID behavior.

JUMO AQUIS 500 Ci

The product controls and acquires the electrolytic conductivity or the concentration. Inductively operating conductivity measuring cells can be connected. The controller is used particularly in media with significant deposits such as oil, fat, or gypsum precipitation.

JUMO AQUIS 500 CR

The product controls the electrolytic conductivity, the specific electrical resistivity, or the TDS value. Conductive two-electrode measuring cells as well as four-electrode measuring cells can be connected to the device.

JUMO AQUIS 500 pH

The product controls and acquires the pH and redox value, the ammonia concentration, and temperatures. The modular structure adapts to the requirements of the application. Up to 4 outputs are available.

JUMO AQUIS 500 RS

The product controls digital sensors with the Modbus protocol. The voltage supply for the digital sensor is integrated into the device. The graphic display allows input signals to be displayed as digits or as a bar graph.

JUMO AQUIS touch P

The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.

JUMO AQUIS touch S

The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.