AVS61 Series
AVS61 Series Tuning Fork Vibrating Level Switch features a core element that is a pair of tuning forks with integrated vibrator. The vibrating fork oscillates at its natural frequency, the resonance frequency decreases when the vibrating fork comes into contact with a medium. The frequency change is detected and is converted to a switching signal output. AVS61 Series supports multiple switching signal outputs, such as relay, PNP or NPN, NAMUR, and 8 / 16 mA.
AVS61 Series is suitable for limit detection of liquid / material levels in vessels, dry-run protection of pumps, pipeline overflow protection, etc. It is widely used in petroleum, chemical industry, tap water, wastewater, food, pharmaceuticals, and other industries.
Features
- Status indicator light, visual and convenient
- No adjustment required, quick start-up
- Supports one-key calibration, safe and reliable
- Multiple fork body structures are available, applicable to liquids, solid particles, powders, etc.
- No mechanical moving parts, maintenance-free, long service life
- Reliable switching action, unaffected by flow, turbulence, bubbles, etc.
- Can be used in safety systems compliant with SIL2 / SIL3 functional safety requirements
Specification
| Vibration Frequency | : | Min. 330 Hz / Max. 1320 Hz |
| Measured Medium | : | Liquid, Powder, Solid, Lump Solid |
| Density of Medium | : | Liquid, ≥0.7 g/cm3 |
| : | Solid, ≥0.32 g/cm3 | |
| : | Powder, ≥0.05 g/cm3 | |
| Liquid Viscosity | : | 0.1 – 10000 cST |
| Switch Point | : | End 13 mm, 25 mm, 35 mm, 40 mm |
| Accuracy | : | Max. +/-1 mm (Water, 23 °C, 1 atm) |
| Repeatability | : | 0.1 mm |
| Hysteresis | : | 2 mm |
| Temp. Influence | : | Max. +1.8 ~ -2.8 mm (-40~250 °C) |
| Density Influence | : | Max. +4.8 ~ -3.5 mm (0.5~1.5 g/cm3) |
| Pressure Influence | : | Max. -2.5 ~ 0 mm (-1.0~60 bar) |
| Torque | : | 10 Nm |
| Wetted Parts Material | : | S.S. 304 / S.S. 316L / S.S. 316L + PTFE |
| Process Connection | : | Thread / Flange / Tri-Clamp |
| Thread | : | BSPP / NPTM |
| Flange | : | ANSI / DIN / JIS |
| Tri-Clamp | : | HKB (ISO2852) / HDB (DIN32676) |
| Ambient Temperature | : | -20~70 °C |
| Process Temperature | : | -40~250 °C |
| Process Pressure | : | -1.0~16 bar (Standard), -1.0~64 Bar (Option) |
| Protection Class | : | IP65 (DIN EN175301-803A/M12*1) |
| : | IP67 (Aluminum Alloy Housing) | |
| : | Explosion Proof, Ex db IIC T6 | |
| (Aluminum Alloy Housing) |
| Status Indicator Light | : | Green (Power), Red (Output) |
| Switching Time | ||
| When fork is covered | : | about 1.0 s |
| When fork is exposed | : | about 1.0 s |
| Power Supply / Rating | ||
| DPDT Relay Output | : | 20-72 VDC or 20-250 VAC (Only for |
| aluminum alloy housing) | ||
| Rating | : | Max. 4 A, 250 V |
| SPDT Relay Output | : | 20-55 VDC (Only for M12 Junction Box) |
| SPST Relay Output | : | 20-55 VDC (Only for DIN EN175301-803A) |
| Rating | : | Max. 4 A, 55 V |
| PNP / NPN Output | : | 18-50 VDC, 3-Wire |
| Rating | : | <1.5 W |
| 8 / 16 mA Output | : | 12.5-30 VDC, 2-Wire |
| (Only for aluminum alloy housing) | ||
| Rating | : | <0.6 W |
| NAMUR Output | : | IEC 60947-5-6 (7-9 VDC), 2-Wire |
| (Only for aluminum alloy housing) | ||
| Rating | : | <1.0 mA or > 2.2 mA |
| Power Consumption | : | Less than 1 W |
| Junction Box | ||
| Aluminum Alloy Housing | : | Standard: M20 * 1.5, Option: 1/2″ NPTF |
| DIN EN175301-803A | : | 4-Pin, Without Outlet Cable |
| M12 * 1 | : | 5-Pin, Standard Outlet Cable 1.5 m |
| Tuning Fork Length | : | 45 mm (Type A) |
| : | 100 mm (Type B) | |
| : | 200 mm (Type C / Type D) | |
| Extension Length | : | Max. 2000 mm |
RELATED PRODUCTS
AMC3200E Series
The ALIAMAG AMC3200E Series is a heat meter converter of electromagnetic flowmeter that can be paired with any of ALIA AMF series sensors. The unit features multiple display parameters including flow rate, energy, flow total, energy total, supply temperature, return temperature, diagnostic, programming and troubleshooting. It is equipped with MODBUS, Bluetooth and BACnet protocol.
AMF301 Series
The AMF301 Series is a threaded-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 4-40 mm.
The AMF301 is widely used for tap water, waste water, food & beverage, pulp & paper and many other industrial fluids.
AMF301 Series electromagnetic flowmeter can be used in compact or remote model with AMC Series converter of electromagnetic flowmeter.
APF830 Series
The APF830 series is a positive displacement meter designed with a pair of tooth profile helical rotors, which displays totalizer with a mechanical pointer and provides 4-20 mA or pulse output. It has the advantages of no pulsation, low noise, high accuracy, high reliability, large measuring scope and strong environment adaptability.
APF830 series helical rotor flowmeter could be used in commercial measurement and engineering management control in petrochemical, metallurgical, electronics and other industries.
