VEGAMET 342
Built-in controller and display instrument for level sensors
For two 4 … 20 mA sensors, panel mounting
Application area
2 x 4 … 20 mA sensor inputs, 2 x 4 … 20 mA current outputs, 3 x operating relay, 1 x fail safe relay (instead of operating relay), Ex approval, separator, ship approval, on-site display, turn/push button and Smartphone operation
The VEGAMET 342 controller feeds the connected 4 … 20 mA sensors, processes the measured values and displays them. The installation housing is ideal for mounting in the control panel. A large display for data visualisation as well as a turn/push button for easy adjustment on site are integrated. With VEGAMET 342, limit values can be reliably monitored and relays, e.g. for overfill protection according to WHG, can be switched. It enables simple implementation of pump controls, flow measurements on open flumes and weirs, totalizers, differential, sum, average and average value calculations. Due to its versatile and universal possibilities, it is suitable for many industrial sectors as well as plant engineers.
Your benefit
- Complex programming of control tasks is no longer necessary
- Simple and safe setup and diagnosis of measuring points via smartphone
- Easy-to-read display from a distance, even in sunlight and darkness
RELATED PRODUCTS
VEGACAL 69
Capacitive double rod electrode for level measurement
Double rod probe, fully FEP insulated
Application area
For use in non-conductive vessels or corrosive liquids. The double rod probe is fully insulated and highly resistant. A full/empty adjustment is necessary for setup.
The VEGACAL 69 is a level sensor for continuous level measurement of liquids in non-conductive vessels or corrosive liquids. The double rod probe is fully insulated and highly resistant.
Your benefit
- Low mounting expenditure through compact double rod version
- Long service life and low maintenance due to high resistance materials
- Maximum utilization of the vessel because measurement over the complete probe length
VEGAFLEX 81
TDR sensor for continuous level and interface measurement of liquids
Universal TDR sensor for liquids of all kinds
Application area
Cable, rod or coaxial sensor. Even in applications with steam, buildup, foam or condensation, the sensor delivers precise and reliable readings – also in standpipes or bypass pipes.
The VEGAFLEX 81 level sensor measures maintenance-free all kind of liquids. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise and reliable measured values. The VEGAFLEX 81 is the economical solution for various level and interface measurements.
Your benefit
- The guided adjustment enables a simple, time-saving and reliable setup
- Shortenable probes offer a simple standardisation and highest flexibility in the planning
- Comprehensive diagnostic possibilities ensure a maintenance-free operation and hence a high plant availability
VEGAFLEX 82
TDR sensor for continuous level measurement of bulk solids
Universal TDR sensor for light bulk solids
Application area
Cable or rod sensor. Even in applications with large amounts of dust, condensation or buildup, the sensor delivers precise and reliable readings.
The VEGAFLEX 82 level sensor measures maintenance-free light and heavy-weight bulk solids. Even in applications with strong dust generation, condensation or buildup, the sensor delivers precise and reliable measured values. The VEGAFLEX 82 is an economical and reliable solution for your application.
Your benefit
- The guided adjustment enables a simple, time-saving and reliable setup
- Shortenable probes offer a simple standardisation and highest flexibility in the planning
- Virtually all bulk solids can be measured with the automatic probe end tracking
VEGAPULS C 22
Wired radar sensor for continuous level measurement
For standard measuring tasks, IP66/IP68, Type 6P
Application area
Lateral cable outlet, measuring range up to 20 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex approval optional
VEGAPULS C 22 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in open channels and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Low overall height and reliable measurement even in case of flooding
- Maintenance-free operation due to non-contact 80 GHz radar technology
VEGAPULS C 23
Wired radar sensor for continuous level measurement
For standard measuring tasks, IP66/IP68, Type 6P
Application area
Axial cable outlet, measuring range up to 30 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval optional
VEGAPULS C 23 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in open channels and level monitoring. In bulk solids, the sensors are used in medium-sized bulk solids silos, segmented vessels or open heaps.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Unaffected by vessel installations due to very good signal focusing
- Maintenance-free operation due to non-contact 80 GHz radar technology