ACA30 Series
The ACA30 Series is an all-in-one portable tool for calibration, testing, and diagnosis. Its output frequency waveform is completely matched with the converter, which can achieve the calibration and testing of AVF7000, ATF3500 and ASF7100 series.
The ACA30 Series adopts advanced integrated circuit design, with low power consumption, using standard CR2032 coin cell battery for power supply, which is easy and convenient to replace the battery. It comes with three keys that can complete all operations, applicable for the calibration, testing, and diagnosis of flowmeters, providing economical, reliable, and efficient services for on-site flowmeters.
Features
- Based on microprocessing technology, low power consumption
- Standard CR2032 coin cell battery for power supply, easy to replace
- Advanced frequency output range 0-999 Hz
- High accuracy +/-0.05%
- Compact size, easy to carry
- LCD display
- Intuitive Controls Make Operation Easy
- Convenient, one-handed operation
- Special composite waveform design, frequency signal output less than 1 V
- Automatic Thermal Compensation, ensuring accuracy in different environments from laboratory, control room to factory environments
Specification
| Principle | : | Source Triangular waveforms | |
| Frequency Range | : | 0-999 Hz (0, 10, 20, 30, 40, 50, 60, 70, 80, | |
| 90, 100, 110, 120, 130, 140, 150, 160, | |||
| 170, 180, 190, 200, 220, 240, 260, 280, | |||
| 300, 320, 340, 360, 380, 400, 600, 799, 999) | |||
| Frequency Amplitude | : | < 1 Volts | |
| Accuracy | : | +/-0.05% of reading | |
| Display Resolution | : | 1 Hz | |
| Impedance | : | 150K ohms | |
| Temperature Drift Coef. | : | 10 PPM / °C of reading | |
| Display Update Rate | : | 4 / Second | |
| Rise / Fall Time | : | ≤ 3.0 μsec. (10% to 90%) | |
| Working Temperature | : | -10~50°C | |
| Storage Temperature | : | -20~70°C | |
| Relative Humidity | : | 20-80% RH non-condensing | |
| Temperature Stability | : | 0.005% FS / °C @ 28-50 °C | |
| Shock and Vibration | : | BS EN61010:20 01, Def Stan 66-31, 8.4 Cat III | |
| EMC | : | BS EN61326-1:1998 + A2:2001 | |
| Safety | : | Electrical BS EN61010:2001.CE marked | |
| Display | : | 1.6″ LCD Display |
| Keypad | : | 3 Internal Keys |
| Shutdown | : | Shutdown via key press or auto shutdown after 10 minutes of no |
| key operation | ||
| Battery | ||
| Battery Model | : | CR2032 (3 V) |
| Capacity | : | 210 mAh |
| Operating Time | : | > 200 days |
| Electrical Connectors | : | Two (φ4 mm) sockets |
| Output Leads | : | Length 0.5 meter (Red * 1, Black * 1) |
| Housing Material | : | ABS |
| Accessory Pocket | : | Soft fabric carrying case |
| Dimensions | : | 81 mm * 79 mm * 56 mm |
| : | 3.2″ * 3.1″ * 2.2″ | |
| Weight | : | 0.25 kg |
| Protection Class | : | IP54 |
| Applicable Products | : | Vortex Flowmeter,
Turbine Flowmeter, Swirl |
| Flowmeter… |
RELATED PRODUCTS
AMC3200E Series
The ALIAMAG AMC3200E Series is a heat meter converter of electromagnetic flowmeter that can be paired with any of ALIA AMF series sensors. The unit features multiple display parameters including flow rate, energy, flow total, energy total, supply temperature, return temperature, diagnostic, programming and troubleshooting. It is equipped with MODBUS, Bluetooth and BACnet protocol.
AMF301 Series
The AMF301 Series is a threaded-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 4-40 mm.
The AMF301 is widely used for tap water, waste water, food & beverage, pulp & paper and many other industrial fluids.
AMF301 Series electromagnetic flowmeter can be used in compact or remote model with AMC Series converter of electromagnetic flowmeter.
APF830 Series
The APF830 series is a positive displacement meter designed with a pair of tooth profile helical rotors, which displays totalizer with a mechanical pointer and provides 4-20 mA or pulse output. It has the advantages of no pulsation, low noise, high accuracy, high reliability, large measuring scope and strong environment adaptability.
APF830 series helical rotor flowmeter could be used in commercial measurement and engineering management control in petrochemical, metallurgical, electronics and other industries.
ATF2000 Series
ATF2000 Series thermal mass flow meter is designed on the basis of thermal dispersion. It adopts method of constant differential temperature to measuring gas flow. It has the advantages of small size, high digitization, easy installation and high accuracy.
ATF2000 is a multi-functional thermal mass flow meter that measures mass flow and volume flow. With insertion type connection, the meter can achieve a hot-tapped installation and maintenance.
