ATF2000 Series
ATF2000 Series thermal mass flow meter is designed on the basis of thermal dispersion. It adopts method of constant differential temperature to measuring gas flow. It has the advantages of small size, high digitization, easy installation and high accuracy.
ATF2000 is a multi-functional thermal mass flow meter that measures mass flow and volume flow. With insertion type connection, the meter can achieve a hot-tapped installation and maintenance.
Features
- Wide flow range: 0.1-120 m/s for gas
- Turndown ratio of least 100:1
- Temperature range up to 350 °C
- Good vibration resistance and long service life
- Hot-tap installation. Easy to install & maintain
- No moving parts, no wear, maintenance-free, low pressure loss
- Multiple installation options: Flange, thread, wafer, clamp and insertion
- Direct mass flow measurement of gases. No additional pressure and temperature compensation
Specification
| Size | : | 15,20,25,32,40,50,65,80,100,125,150, |
| 200,250,300,350,400,450,…7000 mm | ||
| Measuring Range | : | 0.064 Nm3/hr-13854000 Nm3/hr |
| : | 0.083 kg/hr-17872000 kg/hr | |
| Turndown Ratio | : | Over 100:1 |
| Accuracy | : | +/-1.0% of reading + +/-0.5% FS |
| Gas Pressure Effect | : | <0.2% / bar of the measured value |
| Gas Temp. Effect | : | <0.02% / K of the measure value |
| Repeatability | : | +/-0.25% of reading |
| Flange Type Material | ||
|
Flange |
: | Stainless Steel 304 (Option: S.S. 316) |
|
Measuring Tube |
: | Stainless Steel 304 (Option: S.S. 316) |
|
Sensor |
: | Stainless Steel 316L |
| Insertion Type Material | ||
|
Sensor |
: | Stainless Steel 316L |
|
Ball Valve, Adaptor |
: | Stainless Steel 304 (Option: S.S. 316) |
|
Hot-Tap Machine |
: | Stainless Steel 304 |
| Process Connection | : | Flange Type, Insertion Type… |
|
Flange Type |
: | JIS 10K / JIS 20K / JIS 40K |
| : | ANSI 150# / ANSI 300# / ANSI 600# | |
| : | DIN PN10 / PN16 / PN25 / PN40 | |
|
Insertion Type |
: | Thread M33 * 2, G1-1/2″ (Hot-tap Type) |
| : | R3/4″ (Length Adjustable, without Ex) |
| Unit | : | Nm3/hr, kg/hr, NL/min, kg/min, SCFH, PPH, |
| SCFM, PPM | ||
| Temperature | : | -40~200 °C (Standard) |
| : | -40~350 °C (Option) | |
| Ambient Temperature | : | -20~60 °C |
| Pressure | : | 63 kgf/cm2 (Max. ) |
| Protection Class | : | Converter: IP67, Sensor: IP68 |
| : | Explosion Proof, Ex d IIC T4 | |
| IR Remote Control | : | Intrinsically Safe, Ex ib IIC T6 |
| Display | : | 11 Digit totalizer / flowrate |
| Current Output | : | 4-20 mA |
| Load | : | Max. 800 Ω |
| Pulse Output | : | Scaled Pulse (unit / Pulse) (Option) |
| Communication | : | RS485 (MODBUS Protocol) |
| : | HART (Compatible) (Option) | |
| Housing Material | : | Aluminum Alloy |
| Cable Entry | : | Standard: M20 * 1.5, Option: 1/2″ NPTF |
| Power Supply | : | 24 VDC +/-10% |
| : | 90-260 VAC, 50/60 Hz | |
| KeyPad | : | 4 Internal keys / Infrared Remote |
| Control(no need to open the cover) | ||
| for display control | ||
| Installation | : | Compact or Remote |
RELATED PRODUCTS
AMC3200DF Series
The AMC3200DF Series converter features dual frequency excitation. The reduced noise and improved signal to noise ratio make it more ideal for slurry measurement in various industries such as papermaking and chemistry. The unit features multiple display parameters including flow rate, flow total, diagnostics, programming and troubleshooting. It is equipped with Bluetooth, HART and MODBUS communication functions.
AMC3200E Series
The ALIAMAG AMC3200E Series is a heat meter converter of electromagnetic flowmeter that can be paired with any of ALIA AMF series sensors. The unit features multiple display parameters including flow rate, energy, flow total, energy total, supply temperature, return temperature, diagnostic, programming and troubleshooting. It is equipped with MODBUS, Bluetooth and BACnet protocol.
AMF500 Series
The AMF500 Series is a wafer-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 50-200 mm.
AMF500 is widely used for tap water, waste water, food & beverage, pulp & paper and many other industrial fluids.
AMF500 Series electromagnetic flowmeter can be used in compact or remote model with AMC Series converter of electromagnetic
flowmeter.
ATF80 Series
The ATF80 Series Smart Target Flowmeters revolutionize the target deflection method of measuring flow. The target displacement is precisely measured by capacitance sensors.
The resultant signal is then digitally processed via surface-mount, industrial signal processing to Produce a 4-20 mA output proportional to the volumetric flowrate. Smart Target Flowmeter is suitable for low-velocity & high-temp. Gas, steam flowrate. Re-ranging the meter is as simple as changing the target. There is no need to change the whole meter.
AUF761 Series
The AUF761 Series is a fixed-mounted, transit-time ultrasonic Flowmeter. It features factory-mounted transducers that allow it to be flow lab calibrated, reducing or eliminating the random or bias error that can be present in clamp-on style transducer mounting. The meter ensures an accurate, non-invasive measurement of clean homogeneous liquid process, and is widely used in process control and production measurement.