OX1 fittings and accessories for applications of medical gases Series OX1
Tube external diameters: Ø 4, 6 and 8 mm
Fittings threads: metric (M5), BSP (G1/8, G1/4), BSPT (R1/8, R1/4)
Fittings threads: metric (M5), BSP (G1/8, G1/4), BSPT (R1/8, R1/4)
OX1 fittings are designed for the Life Science market, particularly for medical and analytical applications.
Equipment manufacturers of Ventilators, Anaesthesia devices, Oxygen Concentrators, Mass Spectrometry or Bio Medical analysers have qualified the Series OX1 fittings for many years.
Equipment manufacturers of Ventilators, Anaesthesia devices, Oxygen Concentrators, Mass Spectrometry or Bio Medical analysers have qualified the Series OX1 fittings for many years.
- OX1 Products Cleanliness level:
Non volatile residue equal to or less than 550 mg/m2. - Level OX1: ultrasonic cleaning of components, inspection with UV black light, lubrication with a specific grease suitable to be used with oxygen.
- Serie 6000 OX1 push in fittings: Series 6000 OX1 super-rapid fittings have been designed with a special collet which provides an homogeneous tight on the whole surface of plastic tubes, thus ensuring high reliability and a long service life, also after connections and disconnections of the tube are repeated several times.
- Series VNR OX1 unidirectional valves: They are available with Integrated Push-in Fittings. Thanks to their construction they operate at low pressure.
- Series 2000 OX1 brass pipe fittings: The wide range of Camozzi pipe fittings, which includes straight, L and Tee, male or female couplings, guarantees the necessary support during the design of medical and analytical systems.
General Data
| Series 6000 | ||||||
| Diameter | Ø 4, 6 and 8 mm | |||||
| Threads | GAS cylindrical ISO 228 (BSP); M5 | |||||
| Temperature | -10 °C ÷ 80 °C (see the technical data of tubing used) | |||||
| Tube to connect | Polyamide (PA) 6 – 11 – 12, Polyurethane (PU), Fluoropolymer (FEP) | |||||
| Medium | Oxygen, Medical Gazes, Compressed Air or Other low pressure fluids | |||||
| Materials | Standard models: body and collet in nickel-plated brass, O-ring with FKM with Oxygen suitable grease. | |||||
| Working pressure | Standard models: min -0,9 bar – max 16 bar (see tubing) | |||||
| Series VNR | ||||||
| Valve group | Automatic valves | |||||
| Construction | Poppet-type | |||||
| Materials | Brass body Stainless steel spring FKM seals |
|||||
| Mounting | In any position | |||||
| Dimensions tube version | Ø 4, 6, 8 mm | ø 4 – 6 – 8 mm | Ø 4, 6, 8 mm | |||
| Operating temperature | 0 °C ÷ 80 °C | 0°C ÷ 80°C | ||||
| Fluid | Oxygen, Medical Gases, Compressed Air or Other low pressure fluids | |||||
| Series 2000 | ||||||
| Threads | GAS conical ISO 7 ( BSPT ) GAS cylindrical ISO 228 ( BSP ) |
|||||
| Temperature | -40 °C ÷ 120 °C | |||||
| Fluid | Oxygen, Medical Gases, Compressed Air or Other low pressure fluids | |||||
| Materials | Nickel-plated brass | |||||
| Working pressure | 80 bar | |||||
RELATED PRODUCTS
Compact cylinders ISO 21287 Series 32
Single and double-acting, non-rotating, auto-cushioned
ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 mm
Series 32 cylinders, thanks to their compactness, are suitable for installation in confined spaces.
Being in compliance with the ISO 21287 Standard, the cylinders Series 32 can be used in conjunction with mountings/accessories suitable with ISO 15552 standard.
Compact cylinders, Tandem and Multi-position versions Series 31
Double-acting, magnetic
Ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
The compact dimensions allow Series 31 cylinders to be installed within very small spaces. These cylinders are suitable for use with feet, flange and trunnion mountings.
In order to complete the compact cylinder series, two new versions have been introduced: tandem and multi-position. The new Tandem version with 2, 3 or 4 stages generates a thrust force which is 2, 3 or 4 times that of the normal cylinder (standard traction force).
The Multi-position version allows a maximum of 3 different positions which are determined by the stroke of the individual actuators.
Positioning Feedback Cylinders ISO 15552 Series 6PF
Double-acting low friction, magnetic
Ø 50, 63, 80, 100, 125 mm
Series 6PF pneumatic actuators are equipped with a potentiometric linear position transducer integrated inside the rod.
This type of cylinder allows, along the entire stroke, a constant control of the rod position which is read processing the change of the transducer internal resistance.
The pistons have been equipped with a permanent magnet which enables the use of external end-stroke sensors.
The dynamic seals are specific for low friction.
Thanks to the electrical connection, realized by means of an M12 male electric round connector positioned on the rear head, these cylinders fulfil the standards of IP67 protection class.
Series 6PF cylinders comply with the ISO 15552 standards and can be assembled with the entire range of standard accessories.
They are available with bores from 50mm to 125mm with standard strokes from 50mm to 1000mm with intervals of 50mm.
The sturdy design, the flexible installation and the high performance make Series 6PF suitable for use in applications with tensioning cylinders, positioning cylinders and filling, cutting and measuring systems.
Series 16, 24 and 25 Mini-Cylinders (DIN/ ISO 6432)
Series 16, 24 and 25 mini-cylinders are designed according to the European Standard Specifications CETOP RP52-P and DIN/ISO 6432.The choice of materials and other design features have provided the basis for a complete range of versatile and very reliable cylinders.The precise method of crimping the barrel at the head and cap ensures that all the parts are perfectly aligned. Since the Series 16 and 24 may operate at very high speeds, bumpers are attached to the piston as standard in order to reduce noice and wear resulting from high impact loads. Series 24 and 25 are suitable for mounting magnetic proximity switches.Series 25 has an adjustable pneumatic cushion and a magnetic piston. Various mounting accessories are available to enable the cylinders to function in a variety of applications.
Stainless steel cylinders Series 90
Single- and double-acting, cushioned, magnetic
ø 32, 40, 50, 63, 80, 100 and 125 mm
The Series 90 cylinders can be used in critical applications in which a high corrosion resistance is required (for example off-shore, marine, food).
This series of cylinders is normally equipped with end of stroke buffers with adjustable pneumatic cushioning.
Moreover, they are equipped with a mechanical cushioning that makes the impact of the piston less noisy as it reaches the end of the stroke.