Pressure microregulators Series TC
For applications with oxygen, without relieving
Ports: cartridge construction, G1/8 and 1/8 NPTF
Ports: cartridge construction, G1/8 and 1/8 NPTF
The Series TC pressure regulator has been designed to be used for all the applications and equipment where it is needed to insert the single component in customized integrated pneumatic circuits (manifolds) or collectors.
The cartridge design and the compact size allow the regulator to be plugged in a proper seat, making the installation easier and reducing the assembly time.
To produce the new TC regulator, materials have been analized and chosen on the basis of their suitability with the contact medium. The body in PPS and the seals in FKM ensure thus full compatibility with a wide range of gaseous fluids.
General Data
| Construction | Compact with pre-formed diaphragm |
| Ports | Cartridge construction in manifold – G1/8 or 1/8NPTF (aluminium body version only) |
| Mounting | In-line or cartridge (any position) |
| Working temperature | -5°C ÷ 50°C |
| Inlet pressure | 0 ÷ 10 bar |
| Outlet pressure | 0,03 ÷ 0,5 bar 0,1 ÷ 2 bar 0,15 ÷ 3 bar 0,2 ÷ 4 bar |
| Overpressure exhaust | Without relieving |
| Medium | Air, inert and medical gases, OXYGEN |
| Repeatibility | ±0,2% FS |
Coding Example
| TC | 1 | – | R | 3 | 1 | – | C | – | V | – | OX2 |
| TC | SERIES |
| 1 | SIZE |
| R | REGULATOR |
| 3 | WORKING PRESSURE 1 = 0,03 ÷ 0,5 bar 2 = 0,1 ÷ 2 bar 3 = 0,15 ÷ 3 bar 4 = 0,2 ÷ 4 bar |
| 1 | TYPE OF CONSTRUCTION 1 = Without relieving |
| C | PORTS C = Cartridge 1/8 = G1/8 1/8TF = 1/8 NPTF |
| V | SEALS MATERIAL V = FKM |
| OX2 | VERSIONS OX1 = For use with oxygen – cleanliness level according to ASTM G93-03 Standard Level E OX2 = For use with oxygen – cleanliness level according to ASTM G93-03 Standard Level B |
RELATED PRODUCTS
Compact cylinders ISO 21287 Series 32
Single and double-acting, non-rotating, auto-cushioned
ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 mm
Series 32 cylinders, thanks to their compactness, are suitable for installation in confined spaces.
Being in compliance with the ISO 21287 Standard, the cylinders Series 32 can be used in conjunction with mountings/accessories suitable with ISO 15552 standard.
Cylinders aluminium profile Series 41K
Double-acting, cushioned, magnetic Ø 160 - 200 mm
Series 41K cylinder comply with the ISO 15552 standard and can be assembled with the entire range of standard accessories.
The mounting brackets used on the end-blocks tube are designed in an extremely secure way, making use of cylinder tie-rods positioned internally and not visible on the assembled cylinder.
This cylinder series is normally equipped with adjustable endstroke cushioning by means of a screw positioned on the end-block.
Cylinders Aluminium profile Series 61
Single and double-acting, magnetic, cushioned
Standard, low friction, low temperatures and tandem versions
Ø 32, 40, 50, 63, 80, 100, 125 mm
Series 61 cylinders comply with the ISO 15552 standards and can be assembled with the entire range of standard accessories.
A permanent magnet, mounted on the piston in these cylinders, enables information to be received regarding the piston position by means of proximity switches mounted in grooves along the cylinder profile.
These grooves can be covered with a slot cover profile.This cylinder series is equipped with adjustable end-stroke cushioning.
Moreover, they are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke.
Cylinders with integrated guide Series QC
Double-acting, magnetic piston, guided
ø 20, 25, 32, 40, 50, 63 mm
These actuators, suitable for use in very limited space, are available in two versions.
- QCT version: with sintered bronze bushes, suitable when the side loads applied to the cylinder are high.
- QCB version: with linear ball bearings, suitable for high precision and fast cycling applications.
Short-stroke cylinders Series QP – QPR
Series QP: single and double-acting, magnetic
Series QPR: double-acting magnetic, non-rotating
Ø 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm
Series QP - QPR cylinders are available in 10 bore sizes, from Ø 12 to Ø 100.
Their compact dimension allows the installation in small spaces.
Because of their particular construction, they can be mounted by means of feet or trunnion.
The guides are manufactured in the external profile parallel to the sliding axis on three sides.
These are used to locate the switches that sense the piston position.
The non rotating guides make the QPR suitable for supply operations and for handling equipment.