VEGATOR 111
Single channel controller acc. to NAMUR (IEC 60947-5-6) for level detection
Transmission of NAMUR signals for level signalling (single channel)
Application area
The VEGATOR 111 is a controller for level detection with relay output for vibrating level switches VEGASWING, VEGAVIB and VEGAWAVE with electronics version according to NAMUR (IEC 60947-5-6). With this instrument, simple control tasks can be solved. Typical applications are monitoring functions such as overflow or dry run protection. Also for use as part of overfill protections. Optionally a false signal output is available.
Your benefit
- Simple and comfortable function test by means of test key (also for SIL and WHG)
- Simple installation though carrier rail mounting as well as detachable, coded terminals
- Comprehensive monitoring detects short circuit and open circuit of the measuring line and disturbances in the sensor
RELATED PRODUCTS
VEGACAL 64
Capacitive rod probe for continuous level measurement of adhesive products
Rod probe, fully FEP insulated
Application area
For conductive and non-conductive liquids. The rod measuring probe is fully insulated and especially suitable for viscous and adhesive products. A full/empty adjustment is necessary for setup.
The VEGACAL 64 is a level sensor for conductive and non-conductive liquids. The rod electrode is fully insulated and is particularly suitable for viscous and adhesive products.
Your benefit
- Reduced number of cleaning cycles through measurement insensitive to buildup
- Long lifetime and low maintenance requirement through robust mechanical construction
- Maximum utilization of the vessel because measurement over the complete probe length
VEGACAL 67
Capacitive high temperature probe for level measurement of bulk solids
Rod probe, partly ceramic insulated
Application area
For measurement of bulk solids at high process temperatures up to +400 °C. A full/empty adjustment is necessary for setup.
The VEGACAL 67 level sensor can be used universally for continuous level measurement of bulk solids at high process temperatures.
Your benefit
- Precise measuring results in virtually all bulk solids and high temperature ranges
- High flexibility through shortenable probe
- Long lifetime and low maintenance requirement through robust mechanical construction
VEGAFLEX 83
TDR sensor for continuous level and interface measurement of liquids
For aggressive media or extremely high hygienic requirements
Application area
PFA coated or polished sensor. Even in applications with steam, buildup, foam or condensation, the sensor delivers precise and reliable readings.
The VEGAFLEX 83 level sensor measures maintenance-free agressive liquids or liquid media with highest hygienic requirements. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise and reliable measured values. The VEGAFLEX 83 is the economical and ideal solution for your application.
Your benefit
- The gap-free hygienic design ensures simple and reliable cleanability
- The maintenance-free operation increases the plant efficiency
- The guided adjustment enables a simple, time-saving and reliable setup
VEGAFLEX 86
TDR sensor for continuous level and interface measurement of liquids
For the most extreme process conditions
Application area
Cable, rod or coaxial sensor. Its robust, mechanical design and the second process seal, the Second Line of Defense, protect the sensor for demanding measurement tasks. Process temperature: -196 ... 450° C; process pressure: -1 … 400 bar
The VEGAFLEX 86 level sensor measures maintenance-free all liquids under extreme pressure and temperature conditions. Even in applications with buildup, foam generation and condensation, the sensor delivers precise and reliable measured values. In saturated steam applications, a special reference probe ensures a density-independent measurement. The VEGAFLEX 86 offers an economical level and interface measurement for your application.
Your benefit
- The guided adjustment enables a simple, time-saving and reliable setup
- Shortenable probes offer a simple standardisation and highest flexibility in the planning
- Comprehensive diagnostic possibilities ensure a maintenance-free operation and hence a high plant availability
VEGASON 62
Ultrasonic sensor for continuous level measurement
Measures liquids up to 8 m and bulk solids up to 3.5 m away
Application area
Extensive selection of electronics, housings, approvals. Process fittings: G2 or 2 NPT
The VEGASON 62 is an ultrasonic sensor for continuous level measurement of liquids and bulk solids. Typical applications are the measurement of liquids in storage vessels or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or silos. Application areas can be found in all industries. The non-contact measuring principle is unaffected by product features and allows a setup without medium.
For this instrument, new radar sensors with connection housing VEGAPULS 11, 21 or 31, or radar sensors with fixed connected cable VEGAPULS C 11, C 21, C 22 or C 23 are available as alternative.
Your benefit
- Price-favourable solution for simple applications
- Maintenance-free operation through non-contact measuring principle
- Reliable measurement independent of product features