VEGAKON 66
Conductive multiple rod limit switch for liquids
Multiple rod level switch with PP insulation
Application area
With two measuring electrodes you can realise a level detection without hysteresis, with three measuring electrodes a pump or two-point control or a limit level with hysteresis.
The VEGAKON 66 is a conductive limit switch for conductive liquids. The instrument is suitable as full or empty detector in pipelines.
Your benefit
- Reliable pump control through multiple rod probe
- Reduced stock-keeping through exchangeable rod probes
- High flexibility through shortenable probe
RELATED PRODUCTS
VEGACAL 63
Capacitive rod probe for continuous level measurement
Rod probe, fully PE or PTFE insulated
Application area
For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup.
The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction offers high functional safety.
Your benefit
- Savings through simple mounting and setup
- Long lifetime and low maintenance requirement through robust mechanical construction
- Maximum utilization of the vessel because measurement over the complete probe length
VEGAFLEX 81
TDR sensor for continuous level and interface measurement of liquids
Universal TDR sensor for liquids of all kinds
Application area
Cable, rod or coaxial sensor. Even in applications with steam, buildup, foam or condensation, the sensor delivers precise and reliable readings – also in standpipes or bypass pipes.
The VEGAFLEX 81 level sensor measures maintenance-free all kind of liquids. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise and reliable measured values. The VEGAFLEX 81 is the economical solution for various level and interface measurements.
Your benefit
- The guided adjustment enables a simple, time-saving and reliable setup
- Shortenable probes offer a simple standardisation and highest flexibility in the planning
- Comprehensive diagnostic possibilities ensure a maintenance-free operation and hence a high plant availability
VEGAPULS Air 41
Autarkic, continuous level measurement for liquids and bulk solids
Autarkic sensor with measured value transmission by radio technology
Application area
NB-IoT/CAT-M1, LoRa, measuring range up to 15m, accuracy +/-2mm
VEGAPULS Air 41 is the ideal sensor for all autarkic applications with bulk solids and liquids. It is particularly suitable for level measurement in mobile bulk solids silos for dry mortar, concrete and plasters as well as in liquid tanks of all kinds. VEGAPULS Air 41 offers an economical solution through simple and reliable mounting without additional power supply.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- Easy installation thanks to autarkic voltage supply and radio technology
VEGAPULS C 21
Wired radar sensor for continuous level measurement
For standard measuring tasks, IP66/IP68, Type 6P
Application area
Axial cable outlet, measuring range up to 20 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval optional
VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in open channels and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- High accuracy and reliability
VEGASON 62
Ultrasonic sensor for continuous level measurement
Measures liquids up to 8 m and bulk solids up to 3.5 m away
Application area
Extensive selection of electronics, housings, approvals. Process fittings: G2 or 2 NPT
The VEGASON 62 is an ultrasonic sensor for continuous level measurement of liquids and bulk solids. Typical applications are the measurement of liquids in storage vessels or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or silos. Application areas can be found in all industries. The non-contact measuring principle is unaffected by product features and allows a setup without medium.
For this instrument, new radar sensors with connection housing VEGAPULS 11, 21 or 31, or radar sensors with fixed connected cable VEGAPULS C 11, C 21, C 22 or C 23 are available as alternative.
Your benefit
- Price-favourable solution for simple applications
- Maintenance-free operation through non-contact measuring principle
- Reliable measurement independent of product features