The TempoLink® smart assistant supports the integration of the sensor into the application. It operates as smart assistant between the sensor and the user providing following information for diagnosing the sensor:
Current parameter settings such as the resolution and the measurement direction
Internal sensor temperature
Total operating hours
Distance traveled by the position magnets
Sensor information such as the order code and serial number
The TempoLink® smart assistant is designed for portable use and, thanks to its compact design, fits in any pocket. It displays the user interface on the smartphone, tablet or computer via an integrated WLAN access point, so access to the company network is not necessary. The connection and communication between the sensor and the assistant is established via power supply. The Temposonics® R-Series V position sensor, in conjunction with the TempoLink®, provides operators with detailed information to improve machine performance, optimize maintenance cycles and detect problems early to increase the machine operating availability.
Data Sheet (552070 Rev E)Operation Manual (551986 Rev E)TempoLink® Firmware 1.5.29
The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness.
Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This creates a momentary radial magnetic field and torsional strain on the waveguide. The momentary interaction of the magnetic fields releases a torsional strain pulse that propagates the length of the waveguide. When the ultrasonic wave reaches the end of the waveguide it is converted into an electrical signal. Since the speed of the ultrasonic wave in the waveguide is precisely known, the time required to receive the return signal can be converted into a linear position measurement with both high accuracy and repeatability.
The technology, based on magnetostriction, does not rely on moving parts, and is not exposed to mechanical stress. Therefore, the sensors exhibit considerably longer lifespans and much higher reliability when compared to other technologies, even in harsh working conditions. Furthermore, since the output from sensors with this technology corresponds to an absolute position, rather than a relative value, it is not required to recalibrate sensors.
The absolute, linear position sensors provided by Temposonics rely on the company’s proprietary magnetostrictive technology, which can determine position with a high level of precision and robustness.
Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the application, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This creates a momentary radial magnetic field and torsional strain on the waveguide. The momentary interaction of the magnetic fields releases a torsional strain pulse that propagates the length of the waveguide. When the ultrasonic wave reaches the end of the waveguide it is converted into an electrical signal. Since the speed of the ultrasonic wave in the waveguide is precisely known, the time required to receive the return signal can be converted into a linear position measurement with both high accuracy and repeatability.
The technology, based on magnetostriction, does not rely on moving parts, and is not exposed to mechanical stress. Therefore, the sensors exhibit considerably longer lifespans and much higher reliability when compared to other technologies, even in harsh working conditions. Furthermore, since the output from sensors with this technology corresponds to an absolute position, rather than a relative value, it is not required to recalibrate sensors.