VEGASWING 53
Vibrating level switch for liquids
For liquids (density: > 0.5 … 2.5 g/cm³) – with tube extension
Application area
The position of the switching point can be up to 1 m away from the installation location.
VEGASWING 53 is a universal liquid level switch with smallest dimensions. Independent of the mounting position, it detects the limit level reliably and with millimetre accuracy. The device can be used for full or empty alarm, as approved overfill protection or dry run or pump protection in vessels and pipelines. VEGASWING 53 is an economical solution with maximum reliability and safety.
Your benefit
- Precise and reliable function due to product-independent switching point
- Low maintenance costs
- Minimum time and cost expenditure thanks to simple setup without medium
RELATED PRODUCTS
VEGACAL 64
Capacitive rod probe for continuous level measurement of adhesive products
Rod probe, fully FEP insulated
Application area
For conductive and non-conductive liquids. The rod measuring probe is fully insulated and especially suitable for viscous and adhesive products. A full/empty adjustment is necessary for setup.
The VEGACAL 64 is a level sensor for conductive and non-conductive liquids. The rod electrode is fully insulated and is particularly suitable for viscous and adhesive products.
Your benefit
- Reduced number of cleaning cycles through measurement insensitive to buildup
- Long lifetime and low maintenance requirement through robust mechanical construction
- Maximum utilization of the vessel because measurement over the complete probe length
VEGAPASS 81
Application area
The combination of VEGAPASS 81 with VEGAFLEX enables a continuous level measurement outside the vessel. The bypass consists of a standpipe which is mounted as communicating vessel laterally to the vessel via two process fittings. This kind of mounting ensures that the level in the standpipe and the vessel are the same.
VEGAPULS Air 23
Autarkic, continuous level measurement in plastic vessels
Autarkic sensor with measured value transmission by radio technology
Application area
NB-IoT/CAT-M1, LoRa, measuring range up to 3m, accuracy +/-5mm
VEGAPULS Air 23 is the ideal sensor for level measurement in IBCs and plastic vessels. The instrument measures through the closed vessel ceiling and is suitable for nearly all liquids and bulk solids. VEGAPULS Air 23 is quickly mounted by simple and reliable adhesive, ceiling or tension belt mounting. Since no additional power supply is necessary, the autarkic sensor offers a particularly economical solution. The sensor housing with high protection rating IP69 enables maintenance-free continuous operation even outdoors or when cleaning the vessel.
Your benefit
- Exact measuring results independent of medium, process and ambient conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- Easy installation thanks to autarkic voltage supply and radio technology
VEGAPULS C 11
Wired radar sensor for continuous level measurement
For simple measuring tasks, IP66/IP68, Type 6P
Application area
Axial cable outlet, 4 ... 20 mA output, measuring range up to 10 m, accuracy ±5 mm, PVC cable with 10 m length
VEGAPULS C 11 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations, rain overflow basins and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Low-cost radar sensor for simple measurement tasks
- Maintenance-free operation due to non-contact 80 GHz radar technology
VEGASON 62
Ultrasonic sensor for continuous level measurement
Measures liquids up to 8 m and bulk solids up to 3.5 m away
Application area
Extensive selection of electronics, housings, approvals. Process fittings: G2 or 2 NPT
The VEGASON 62 is an ultrasonic sensor for continuous level measurement of liquids and bulk solids. Typical applications are the measurement of liquids in storage vessels or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or silos. Application areas can be found in all industries. The non-contact measuring principle is unaffected by product features and allows a setup without medium.
For this instrument, new radar sensors with connection housing VEGAPULS 11, 21 or 31, or radar sensors with fixed connected cable VEGAPULS C 11, C 21, C 22 or C 23 are available as alternative.
Your benefit
- Price-favourable solution for simple applications
- Maintenance-free operation through non-contact measuring principle
- Reliable measurement independent of product features