Mounting bracket with adjustable sensor holder
Application area
High quality and robust mounting strap made of 316L stainless steel. The adjustable sensor holder allows easy alignment of the sensors. The mounting strap is particularly suitable for VEGAPULS 11, 21, 31 and C 11, C 21, C 22, C 23 series radar sensors and VEGAPULS Air 41, but can also be used for other instruments with appropriate process fittings. The necessary mounting material for wall mounting of 316L is supplied with the instrument.
RELATED PRODUCTS
VEGACAL 63
Capacitive rod probe for continuous level measurement
Rod probe, fully PE or PTFE insulated
Application area
For measurement in conductive and non-conductive liquids. A full/empty adjustment is necessary for setup.
The VEGACAL 63 level sensor can be used universally for the measurement of conductive and non-conductive liquids. The rod electrode is fully insulated and the proven mechanical construction offers high functional safety.
Your benefit
- Savings through simple mounting and setup
- Long lifetime and low maintenance requirement through robust mechanical construction
- Maximum utilization of the vessel because measurement over the complete probe length
VEGACAL 64
Capacitive rod probe for continuous level measurement of adhesive products
Rod probe, fully FEP insulated
Application area
For conductive and non-conductive liquids. The rod measuring probe is fully insulated and especially suitable for viscous and adhesive products. A full/empty adjustment is necessary for setup.
The VEGACAL 64 is a level sensor for conductive and non-conductive liquids. The rod electrode is fully insulated and is particularly suitable for viscous and adhesive products.
Your benefit
- Reduced number of cleaning cycles through measurement insensitive to buildup
- Long lifetime and low maintenance requirement through robust mechanical construction
- Maximum utilization of the vessel because measurement over the complete probe length
VEGAPASS 81
Application area
The combination of VEGAPASS 81 with VEGAFLEX enables a continuous level measurement outside the vessel. The bypass consists of a standpipe which is mounted as communicating vessel laterally to the vessel via two process fittings. This kind of mounting ensures that the level in the standpipe and the vessel are the same.
VEGAPULS Air 42
Autarkic, continuous level measurement for liquids and bulk solids
Autarkic sensor with measured value transmission by radio technology
Application area
NB-IoT/CAT-M1, LoRa, measuring range up to 30m, accuracy +/-2mm
VEGAPULS Air 42 is the ideal sensor for all autarkic applications with bulk solids and liquids. It is particularly suitable for level measurement in mobile bulk solids silos for dry mortar, concrete and plasters as well as in liquid tanks of all kinds. VEGAPULS Air 42 offers an economical solution through simple and reliable mounting without additional power supply.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- Easy installation thanks to autarkic voltage supply and radio technology
VEGAPULS C 21
Wired radar sensor for continuous level measurement
For standard measuring tasks, IP66/IP68, Type 6P
Application area
Axial cable outlet, measuring range up to 20 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval optional
VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations and rain overflow basins, for flow measurement in open channels and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- High accuracy and reliability