VEGAWELL S51
With ceramic measuring cell, standard level probe
Application area
Output signal 4 … 20 mA, PE suspension cable, available measuring ranges: Relative pressure 0.1 / 0.2 / 0.4 / 1 / 2.5 bar, Sensor length depends on measuring range
The VEGAWELL S 51 is suitable for continuous level measurement of liquids, particularly for gauge measurement in water basins, waste water shafts, deep wells and applications on ships. The VEGAWELL S 51 is an economical solution through its versatile and simple mounting options.
RELATED PRODUCTS
VEGACAL 67
Capacitive high temperature probe for level measurement of bulk solids
Rod probe, partly ceramic insulated
Application area
For measurement of bulk solids at high process temperatures up to +400 °C. A full/empty adjustment is necessary for setup.
The VEGACAL 67 level sensor can be used universally for continuous level measurement of bulk solids at high process temperatures.
Your benefit
- Precise measuring results in virtually all bulk solids and high temperature ranges
- High flexibility through shortenable probe
- Long lifetime and low maintenance requirement through robust mechanical construction
VEGAPASS 81
Application area
The combination of VEGAPASS 81 with VEGAFLEX enables a continuous level measurement outside the vessel. The bypass consists of a standpipe which is mounted as communicating vessel laterally to the vessel via two process fittings. This kind of mounting ensures that the level in the standpipe and the vessel are the same.
VEGAPULS 21
Compact radar sensor for continuous level measurement
For standard measuring tasks, plastic housing IP66/IP67, Type 4X
Application area
4 ... 20 mA/HART output, measuring range up to 20 m, accuracy ±2 mm, Ex approval optional
VEGAPULS 21 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and additives in all industrial areas, or for measuring levels in plastic tanks from the outside through the tank wall. In bulk solids the sensors are used in small bulk solids silos or open containers.
Your benefit
- Exact measurement results independent of medium properties and process conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- High accuracy and reliability
VEGAPULS Air 42
Autarkic, continuous level measurement for liquids and bulk solids
Autarkic sensor with measured value transmission by radio technology
Application area
NB-IoT/CAT-M1, LoRa, measuring range up to 30m, accuracy +/-2mm
VEGAPULS Air 42 is the ideal sensor for all autarkic applications with bulk solids and liquids. It is particularly suitable for level measurement in mobile bulk solids silos for dry mortar, concrete and plasters as well as in liquid tanks of all kinds. VEGAPULS Air 42 offers an economical solution through simple and reliable mounting without additional power supply.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Maintenance-free operation due to non-contact 80 GHz radar technology
- Easy installation thanks to autarkic voltage supply and radio technology
VEGAPULS C 11
Wired radar sensor for continuous level measurement
For simple measuring tasks, IP66/IP68, Type 6P
Application area
Axial cable outlet, 4 ... 20 mA output, measuring range up to 10 m, accuracy ±5 mm, PVC cable with 10 m length
VEGAPULS C 11 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping stations, rain overflow basins and level monitoring. In bulk solids the sensors are used in small bulk solids silos or open containers.
Your benefit
- Exact measurement results independent of medium, process and environmental conditions
- Low-cost radar sensor for simple measurement tasks
- Maintenance-free operation due to non-contact 80 GHz radar technology