AHT530 Series
The AHT530 Series is a battery-powered, hand-held unit designed to configure, calibrate and troubleshoot to smart transmitter either remotely or nearby.
AHT530 allows you to establish communication with a Hart field instrument over the existing 4-20 mA DC lines, covering the five process variables of flow, pressure, temperature and level, control valve etc.
Features
- Common to most smart field Instruments
- AA alkaline batteries or rechargeable battery available
- Battery operation time more than 100 hours
- Low battery alarm
- Self-check function / Automatic power-off
- Large display (21 characters by 8 lines)
- Microprocessor-based field communicator
- USB port to charge
Specification
| Display | : | LCD dot matrix, 21 characters * 8 lines |
| Keypad | : | 20 General keys, one power switch |
| Signal Connection | : | Alligator clip or grabber clip |
| Cable Length | : | 1.5 m |
| Function | : | Display, setup and alteration of parameter |
| : | Zero point adjustment, calibration | |
| : | Auto power-off | |
| Communication Line | ||
| Line Length | : | Up to 1500 m |
| Load Resistance | : | 250-600 Ω |
| Load Capacitance | : | Less than 0.22 μF |
| Load Inductance | : | Less than 3.3 mH |
| Power Consumption | : | 191.3 mA (Working state) |
| : | 1 μA (Power-off state) | |
| Material | ||
| Case | : | ABS resin |
| Keyboard | : | Polycarbonate |
| Protection Class | : | IP54 |
| Operating Temperature | : | -20~55 °C |
| Storage Temperature | : | -20~55 °C |
| Ambient Humidity | : | 90% RH or less |
| Power | ||
| Battery | : | Three AA alkaline Batteries |
| : | Three Ni-MH Batteries (Rechargeable) | |
| Operable Time | : | Alkaline Battery: Up to 150 Hours |
| : | Ni-MH Battery: Up to 100 Hours | |
| Charge up time | : | Less than 12 hours |
| Dimensions | : | 231 mm (L) *102 mm (W) *61 mm (H) |
| Battery Charger | : | USB connect with computer |
| : | 90-260 VAC, 50/60 Hz | |
| Weight | : | 0.4 kg (Communicator) |
| : | 1 kg (Including accessories) | |
| Standard Package | ||
| : | ATH530 Hart Communicator * 1 set | |
| : | Communication cable 1.5 m * 1 pair | |
| : | USB connector 1.5 m (Charge) * 1 set | |
| : | Ni-MH Battery 1.2 V * 3 pcs | |
| : | Power Adapter 90-260 VAC * 1 set | |
| : | Alligator clip * 1 pair | |
| : | Grabber clip * 1 pair | |
| : | Shoulder bag * 1 set |
RELATED PRODUCTS
AMF100 Series
The AMF100 Series is an insertion-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 150-6000 mm.
AMF100 is widely used for tap water, waste water, food & beverage, pulp & paper and many other industrial fluid.
AMF100 Series electromagnetic flowmeter can be used in compact or remote type with AMC Series converter of electromagnetic flowmeter.
AMF900 Series
The AMF900 Series is a flange-type electromagnetic flowmeter ideal for conductive liquids. It comes in sizes from 10A to 2000 mm.
AMF900 is widely used for sewage, industrial waste, chemical, solvent, food & beverage, pulp & paper and many other industrial fluids.
AMF900 Series electromagnetic flowmeter can be used in compact or remote model with AMC Series converter of electromagnetic flowmeter.
ATF80 Series
The ATF80 Series Smart Target Flowmeters revolutionize the target deflection method of measuring flow. The target displacement is precisely measured by capacitance sensors.
The resultant signal is then digitally processed via surface-mount, industrial signal processing to Produce a 4-20 mA output proportional to the volumetric flowrate. Smart Target Flowmeter is suitable for low-velocity & high-temp. Gas, steam flowrate. Re-ranging the meter is as simple as changing the target. There is no need to change the whole meter.